Their proximity to the power connector and the LPT port might suggest relevance to either of those, however. Technical data is gathered for the products supported by this tool and is used to identify products, provide relevant solutions and automatically update this tool, to improve our products, solutions, services, and your experience as our customer. Remove power from the unit, hold the [Test] button down, then power the unit and hold down for 15 seconds and release the button. There are two screws that appear to be holding the device together. Connect the print server to the network and printer s.

Uploader: Shamuro
Date Added: 17 May 2014
File Size: 15.49 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 36855
Price: Free* [*Free Regsitration Required]

After installing the jetdirevt server, the next step is to configure it. Although this device does not have an AUI connection, perhaps the chip is also used in Thin-net networks as well. It is a low power bit processor able to address 16 megabytes of memory. There is also a PO which is probably HP’s purchase order number for this batch of devices.

HP Customer Support – Software and Driver Downloads

It might be wise to install the printer onto your computer using it’s own installation CD, but this will suffice. That is what the manual s say, and it should now have the IP address of Thank you for your patience.


Download list – Download multiple files at once View, edit and download your entire list of software and drivers here. HP Download and Install Assistant. jetdifect

HP JetDirect EX Plus JA

Product sold without warranty: Unable to determine warranty status. Although I don’t know exactly when it was purchased, I can assume this particular device was created in the mid to late 90’s, as we will see proof of later.

The right sticker on the circuit board contains the exact same numbers that were on the back outer panel with the Serial Number. Here we have the very busy front of the circuit board. I imagine this has some relationship to the previous chip, but Jrtdirect not sure what, specifically, they do for the Print Server in general.

A Google search for the first number yields several results on purchasing these parts.

After resetting the printer server, you will llus to reconfigure it. All very good, until I tried to find manuals and howtos for the JDs. We were unable to find any drivers for your product.

Drivers may be in development so please check back at a later date or visit the product homepage. The following is adapted from the site http: Plug the network cable into the print server. There are also two stickers providing device-specific information.

Not sure which drivers to choose? Resetting the print server will reset all settings to their factory defaults. Circuit Board – Back – Chips Here is a close-up of the chips on the back side of the circuit board. Cracking Open Tools Required:. Select your operating netdirect and version.

Last Drivers  ASUS Z7000 DRIVER

Cracking Open the HP JetDirect EX Plus – TechRepublic

This page requires Javascript. Cracking Open Tools Required: The serial number provided does not match the previously selected product. This picture shows the four larger chips to the right of the BIOS chip.

There are two screws that appear to be holding the device together. Email list of drivers. A second client was throwing out some old HP JetDirect EX Plus JA boxes, that had not been used for several years, because as older printers were replaced with new ones that came with ethernet cards, the JD were no longer needed.

Found a number of helps on resetting the JDs to factory defaults, but could not tell me why the IP address was not defaulting to that in the manual s.