Anyways, the steps worked for me and I have established a connection with my router, I just need to know if I need to do additional steps to keep the driver permanently etc. I’ve been running all morning and I typically see the connection errors within 30 minutes or so. Receive interrupt reduction can improve CPU efficiency if properly tuned for specific network traffic. Right, those are for the ethernet wired adapter, not the wireless. This value ensures that an interrupt is generated after the initial packet is received within the set amount of time, which is useful only if RxIntDelay is non-zero. Using Jumbo frames at 10 or Mbps is not supported and may result in poor performance or loss of link.
|Date Added:||12 September 2007|
|File Size:||17.59 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
This command will show different values for each type of interrupt: I didn’t include the output from nm-tool because, as Intrl mentioned, I’ve disabled the Network Manager. Channel Bonding documentation can be found in the Linux kernel source: Now to do a modprobe automatically, edit rc. August 15th, 5.
I do not have access to my laptop right now, when I get it back I will look into it on a live cd. Can an Intel LM adapter using the standard Ubuntu driver be spoofed without downloading any extra software? Current configuration, please let me know if any other diagnostic info would be helpful.
I’ve been running all morning and I typically see the connection errors within 30 minutes or so. Page 1 of 3 1 2 3 Last Jump to page: I’ll try reinstalling it from SourceForge. The install location listed above is the default. The install location listed above is the default location. Basically, I’m seeing the behavior described here: Transmit interrupt reduction can improve Conhection efficiency if properly tuned for specific network traffic.
The default value for each parameter is generally the recommended setting, unless otherwise noted. This reduces interrupt load on the system and can lower CPU utilization under heavy load, but will increase latency as packets are not processed as quickly.
The latest ethtool version is required for this functionality.
Linux* Driver for Intel(R) Ethernet Network Connection — The Linux Kernel documentation
The igb driver supports IEEE time stamping for kernels 2. Strip the CRC from received packets before sending up the network stack.
Once the NVM has been locked via the parameter at 1 when the driver loads it cannot be unlocked except via power cycle. These drivers are only supported as a loadable module.
Post as a guest Name. Thanks for helping with this!
Intel® Network Adapter Driver for PCIe* Intel® Gigabit Ethernet Network Connections Under Linux*
Use the ifconfig command to increase the MTU size. Verify that the interface works. I need to tell someone my MAC address imminently so I can be added to their router, but I am not at my computer. Kernel is the core of any operating system.
Downloads for Intel® 82577 Gigabit Ethernet PHY
There are three classes defined: A descriptor describes a data buffer and attributes related to the data buffer. If the driver is built as a module, the following cobnection parameters are used by entering them on the command line with the modprobe command using this syntax:.
It ensures that an interrupt is generated after the initial Packet is sent on the wire within the set amount of time.